How to Clean Switchboards

How to Clean Switchboards

Posted by

One of the most ignored parts of a house or an office are the switchboards, when it comes to cleaning. But, they are one of the dirtiest parts too. Think how many times in a day, several people touch the switch boards to access the lights, fans and plug points. Germs and bacteria from our hands transfer to the switches and switchboards, and then easily transfer back on another person’s fingers and then indirectly, into their bodies. In this article, we will throw light on how to clean switchboards, so that each and every part of your house or office is sparkling clean and hygienic.

Next Blog: How to Create Surface Sanitizers at Home (DIY)

In the current wake of the Coronavirus, it becomes even more necessary to keep your switchboards clean and sanitized all the time. But, you cannot clean these electrical sockets with a lot of water. Water entering the sockets might lead to a short circuit when you switch on a switch. Here is the right way to clean switchboards.

3 Simple Ways of Cleaning Switchboards:

  • Baking Soda:

Baking soda is a versatile and very useful home cleaning agent. It can practically be used anywhere for cleaning home surfaces. This humble soda is not only used for baking, but can be used to clean hard surfaces, electrical appliances, and any other home surface. To use this for cleaning switchboards, just make a paste of half a lemon with a teaspoonful of baking soda. Take the squeezed lemon rind and dip it in this paste and rub it over the switchboard. Scrub your switchboard to get amazing results.

How it Works:

The granules of the soda act as an emulsifying agent for the oily grime and stains on the switchboard. This grime then sticks to the baking soda remnants that can be wiped off. To clean off germs on the board, dip a clean cloth in a vinegar solution and wipe it gently on the switchboard. Again wipe off with a clean cloth.

  • Nail Remover:

Your regular nail polish remover is of much greater use than just removing nail paint from your nails. This is nothing but acetone, that works as a powerful stain remover. Just dip a clean, soft cloth in acetone directly and wipe it over the switchboards to remove stains and grime.

How it Works:

Acetone chemical used in nail polish removers are powerful stain removers that loosen the bonds of the stains and help to remove them. This chemical also kills any surface germs easily.

  • Toothpaste:

Did you know that your toothpaste can not only clean your teeth, but also your switchboards? Toothpastes are formulated in such a way that they can whiten and brighten your teeth, apart from removing germs and bacteria. You can use any old toothbrush and apply some toothpaste on it. Then rub directly over the switchboards to remove the stains and grime.

How it works:

The sodium bicarbonate present in the toothpaste is a great chemical for whitening and brightening of your teeth. It can also kill germs and easily remove stubborn stains.

Word of Caution:

  • Too much water or cleaning liquid should not be used when cleaning switchboards, as it may lead to a fire. You SHOULD TURN OFF the main power supply of the house before you begin cleaning switchboards.
  • Do not ‘ON’ any switch in a switchboard immediately after cleaning it. Wait for an hour or two.
  • Be careful not to spray too much liquid cleaner on the surface of the switchboard as the liquid might penetrate inside the switches, which might cause a spark when the electrical supply is switched on. It is better to spray the liquid on a cloth and use the cloth the wipe the board.
  • Ensure that you have installed a shock retardant quality of switchboard that meets all international safety standards to avoid any kind of hazard. You also get dust repellent switches and switchboards today that can reduce the probability of them getting stained and dirty.

These are some basic protocols you must follow when cleaning switchboards. You can also use some good quality cleaners to clean switchboards.

Leave a Reply