mold remover - pfokus- 10 Minutes for mom

How to Remove Mold from Dry wall & Floor

Posted by

Mold easily breeds on surfaces where there is dampness or too much humidity. Even if you feel your walls are dry, the weather conditions might be humid, leading to mold and mildew breeding. Furthermore, if the floor is damp, mold quickly spreads on the surrounding areas too. If you are wondering how to remove mold, then here are some steps you must adhere to. We will also discuss the dangers of mold in detail.

Dangers of Mold:

  • Mold and mildew reek of a bad odor.
  • It leaves an unsightly blackish-green residue on damaged caulk, damp natural stone and grout, shower corners and walls.
  • Mold and mildew cause health hazards like respiratory problems, eye infections and wheezing.
  • Dangerous mold should be checked and cleaned immediately as it ruins the aesthetic of your place.

Common Areas Where Mold and Mildew Breed:

  • Mold and mildew need dampness to breed. Bathrooms are generally the best areas for their breeding as the dampness on the floor and atmosphere gives them favorable conditions to breed and spread.
  • If your shower caulk is peeling or cracked, water may get stagnated in the crevices and corners. Mold easily breeds on damaged caulk.
  • Similarly, if you have missing or damaged grout or cracked tile, water may be present in their holes too. Mold and mildew can start breeding from such pits and cracks and quickly spread on the entire area.

How to Remove Mold? 

If you are looking for ways to remove bathroom mold or floor mold, you need a very strong mold remover. Get a cleaning product that is deep-penetrating into porous natural stone and grout surfaces. Such deep-action penetrating cleaners have the capability to eliminate hidden traces of mold at the root-level. If mold remains anywhere in the pores, it quickly spreads to the entire surrounding surface, even if it is dry. Once born, mold requires very little moisture from the air to thrive. You can use the mold remover to clean mold from dry walls in the bathrooms as well. You can begin cleaning from the walls and then on the floors to get completely hygienic surfaces.


Buy On pFOkUS

How to Prevent Mold from Returning?

After deep-cleaning mold and mildew with heavy-duty cleaners, you cannot guarantee that they will not breed again. Mold will breed again on porous natural stone and grout. The only way to prevent mold from returning is to seal grout and tile. You will also need to replace caulk with a permanent epoxy adhesive that does not keep getting deteriorated. For sealing grout too, you need to use a strong epoxy grout sealer that gives you permanent results. Once you have replaced your caulk and seal the grout, you can seal your tile to make it waterproof. As water does not get absorbed into the pores, the surfaces dry quickly and leave no dampness for mold to breed.

You can buy high-quality mold cleaners and grout and tile sealers from pFOkUS. Their products deliver better results than any others available on the market.