Laminate floors need some special products for thorough cleaning and sealing. You cannot use the regular tile cleaners or sealers. Laminate appears similar to wood. The floor might not appear dirty at a glance, but when you perform a white socks test, you will know about the amount of dirt accumulated on the surface. To help you keep your flooring gleaming, we will guide you on laminate flooring cleaning the right way using the right DIY laminate floor cleaner and sealer.
Before we begin, let us know about some prominent characteristics of Laminate material:
Characteristics of Laminate Flooring:
- It is cheaper than hardwood flooring.
- Easy to install
- Water and moisture resistant
- Gives the look of a hardwood flooring.
- Although great for low-budget homes, it can sometimes look fake.
- It can be slippery.
So, now that you have a clearer idea for laminate floors, you should also know how to maintain and clean them in the best possible way.
Laminate Maintenance Tips:
- You should wipe your laminate surfaces by wiping up the wet spillage immediately. If you let water remain on the floor, it can lead to damaging your laminate.
- It is best to place mats under your pet’s food and water bowl, so that the spillage does not affect your floor. Also, place a mat under your baby’s high chair as well.
- Do not use Murphy’s oil while cleaning your laminate floors, as this may also leave streaks and marks.
- You vinegar in a diluted form with water only if you must. As a general rule, vinegar is acidic and any acidic cleaner should be avoided on laminate.
- Do not indulge in traditional wet mopping on laminate floors.
- You should also be careful about trimming your pet’s nails as they may unknowingly scrape off the protective sealant on your laminate flooring.
These are some of the basic cleaning and maintenance tips you must adhere to while cleaning your laminate floor tiles. You must have understood by now that it is a delicate surface and needs proper care. Here are some tips to clean your laminate floors using the right DIY laminate floor cleaner and sealer.
DIY Laminate Floor Cleaning and Sealing:
- You should sweep and vacuum the surface often to remove any kind of pet hair, dust and other debris that may collect.
- If you want to mop, use a damp mop and not a wet one. It is ideal to use a hot water solution with a few drops of dish soap as your mopping water. A solution of hot water and a few drops of dish soap make the best DIY laminate floor cleaner.
- A steam mop is ideal for deep cleaning once in a while.
- Do not use cleaning products with ammonia as these can strip off the protective sealant.
- Although some may consider it unnecessary to seal laminate floors with a top coat as it has a very hard top layer, sealing it to make it water-proof will increase its functionality and longevity.
- You can apply a top coat of polyurethane on the entire surface, as it protects the floor tile and also the cracks, if any.
- You can get a good and top rated DIY laminate floor sealer from the market and follow the instructions on the container to seal your floor tile.
DIY Laminate Floor Repair Kit:
If your laminate flooring has sustained some damage, there is no need to panic. You can easily get a laminate floor repair kit and fix the damages yourself.
- Before you begin repairing the damages using a repair kit, you need to first clean your laminate floors and then wait until it is completely dry. Any dirt particles on the flooring might prevent you from fixing the scratches and may even scratch the surface further.
- First, using a sharp chisel, round off the edges of the scratches to get a smoother surface.
- Any laminate floor repair kit will have a heating tool. You need to press the button to heat up the tip.
- Next, press this heated tip against the hard wax(provided in the kit) to melt it.
- Then, drop this wax on the damaged area and fill the crack, scratch or hole.
- You should put some extra wax on the damaged area, as it can be cleaned later.
- Next, grab the rasp on the heating tool and rub away all the excess wax and ensure that the surface looks leveled.
It is quite easy to repair a damaged laminate tile if you act swiftly. Laminate flooring looks beautiful and brings in warmth and contemporary decor to your home decor. Now that you are quite aware of the basic ways to clean, maintain, seal and repair a laminate flooring, let us also read more on some commonly asked FAQs.
- Which is the best cleaner for laminate floors?
Leifheit and Bona Laminate floor cleaner is considered the best cleaner for laminate floors. It comes pre-mixed and ready-to-use. You just have to spray and wipe off.
- Leifheit Parquet And Laminate Cleaner – Details & Reviews
- Herbo Pest Blueoxya – Details & Reviews
- Bona Wood Floor Cleaner – Details & Reviews
- Which product can be used to make laminate floors to shine?
The Quick Shine Multi-Surface Floor Finish and Polish is a great product to bring a lovely shine on your laminate floors that can last upto 3 months.
- Can you use rubbing alcohol on laminate flooring?
Rubbing alcohol, denatured alcohol or any other alcohol like gin and vodka are great for removing stains from your laminate flooring. But it should be diluted with water.
- Can mold grow under laminate flooring?
If the underlayment at the time of installation is not treated and made water-proof, mold and mildew can easily grow under laminate flooring. You need to make the surface completely water-resistant and dry before installing.
- How to get hardened polish off the laminate floor?
If you have hardened polish on your laminate floor, you can try softening it with rubbing alcohol or nail polish remover. This will soften it and remove it.
This is the complete guide on laminate floor cleaning, maintenance and sealing. Ensure that you follow the above tips to enhance the beauty of your flooring. For cleaning and maintenance of other tile surfaces such as marble, travertine, granite, etc, you can use Imperia Deep Clean for the best results.